- Home
- Clearcoats
- #530 HP Quick Finish Clearcoat 4.2 VOC
- #535 Production Clearcoat 4.4 VOC
- #545 High Solids (HS) Clearcoat 4.2 VOC
- #550 Universal Urethane Clearcoat 4.4 VOC (NR)
- #555 Universal Quick Finish Clearcoat 4.2 VOC (NR)
- #570 Production Clearcoat 2.1 VOC
- #575 Euro Max High Solids Clearcoat 4.2 (NR)
- #580 Euro Max High Solids Clearcoat 2.1 VOC
- #675 Euro Max HS Glamour Clearcoat 4.2 VOC
- #590 Quick Finish Speed Clearcoat 2.1 VOC
- Primer Surfacers
- Custom Single-Stage Paints
- Series 700 Custom Colors 2.8 VOC
- #600 Gloss Black
- #601 Flat Black
- #603 Gloss White
- #606 Fleet White
- #607 Oxford White
- #608 Charcoal Mist Metallic
- #609 Brilliant Black Pearl
- #610 Viper Red
- #611 Swift Red
- #612 Candy Apple Red
- #613 Wine Red Mica
- #614 Red Crystal Pearl
- #615 Omaha Orange
- #616 Imperial Orange Metallic
- #617 Corvette Yellow
- #618 Jaguar Racing Green
- #619 Dark Green
- #620 Light Blue Metallic
- #621 Teal Metallic
- #622 Spectra Blue Metallic
- #623 Hi-Lite Blue Pearl
- #624 Dark Blue Metallic
- #625 Gold Metallic
- #626 Champagne Metallic Pearl
- #627 Galaxy Silver
- Aerosol Paint Sprays
- Thinners
- Hardeners
- Reducers
- Solvents and Cleaners
- Fillers
- Putty
- Body Shop Supplies
- Advantage Distributors
(1-877-334-6474)
website designed & maintained
by RHCreative.com
Custom Packed Single-Stage Paints
SERIES 700
Low VOC Urethane Paint
High Performance Urethane Single Stage - 2.8 VOC
PRODUCT DESCRIPTION:
ADVANTAGE #700 Series 2.8 VOC Acrylic Urethane Colors are high solids, high gloss, low VOC coatings intended for use as a protective maintenance coating for automotive and industrial applications, surfaces exposed to humidity, chemicals and corrosive elements.
| #700 SERIES CUSTOM COLOR/CATALYST: | |
| HIGH PERFORMANCE URETHANE SINGLE STAGE SERIES 2.8 VOC - GALLON | |
| Gloss Black | #700-01 |
| Flat Black | #701-01 |
| Brilliant Black Pear | #702-01 |
| Gloss White | #703-01 |
| Fleet White | #704-01 |
| Pure White | #705-01 |
| Oxford White | #707-01 |
| Charcoal Mist Metallic | #708-01 |
| Galaxy Silver | #709-01 |
| Viper Red | #710-01 |
| Swift Red | #711-01 |
| Candy Apple Red | #712-01 |
| International Harvester Red | #713-01 |
| Allis Chalmers Orange | #714-01 |
| New Cat Yellow | #715-01 |
| School Bus Yellow | #716-01 |
| John Deere Yellow | #717-01 |
| John Deere Green | #718-01 |
| Ford Blue | #719-01 |
| Urethane Catalysts (Quart): | |
| 2.8 VOC High Performance Urethane Paint Catalyst | #729-04 |
DIRECT TO METAL ADHESION:
NOTE: Performance is better when using DTM
primer under #700 series paint.
POT LIFE:
Pot life will be about 3-5 hours at 77° F.
| MIXING DIRECTIONS (4:1): | |
| 2.8 VOC | |
| 4 PARTS | #700 Series Single Stage |
| 1 PART | #729 Catalyst |
SURFACE PREPARATION:
1. Wash area thoroughly with soap and water to remove contaminates that solvent based cleaners cannot remove effectively.
2. Clean area with Wax and Grease Remover.
3. Use a tack cloth to remove any surface contaminates that may have settled on the repaired areas prior to paint application.
4. Apply #700 series High Performance Urethane Single Stage Color.
APPLICATION DIRECTIONS:
Adjust air pressure to 40-50 psi at gun for gravity, siphon feed guns or HVLP use 6-10 psi at air cap. Apply 2-3 medium
coats (maximum 2 mils wet per coat) or until hiding is achieved. Allow a 5-15 minute flash time between coats and
before force drying. NOTE: In temperatures above 95°F, 2-5% retarder may be added to increase flowout.
| DRY TIMES AT 77°F: | |
| FLASH TIME | 5-15 MINUTES |
| TO DELIVER | 16-24 HOURS |
| FORCE DRYING AT 140°F: | |
| PURGE TIME | 15 MINUTES |
| BAKE TIME AT 140°F | 40 MINUTES |
RECOATING:
2.8 VOC ADVANTAGE #700 Urethane Single Stage Color may be recoated after 16-24 hours at 77° F. After 16-24 hours it must be lightly sanded/scuffed before additional color or clearcoat may be applied.
ACCELERATOR & FISHEYE ELIMINATOR:
Accelerator and/or Fisheye Eliminatory is not recommended for use in this product.
CLEAN-UP:
Clean spray equipment immediately after use with Gun Wash, or a high quality lacquer thinner, or compliant solvent depending on area regulations.
| TECHNICAL DATA: | ||
| Color: Various | Catalyst: #729 | Mixing ratio (2.8 VOC): 4:1 |
| Weight Solids (RTS): 52 - 70% | Viscosity #2 Zahn (RTS): | 18 - 28 seconds #2 Zahn |
| Pot Life: 3-5 hours | Film Build per coat: | 1.0-2.0 mils per full wet coat |
| Coverage: 850 sq.ft. per gallon @ 1 dry mil |
Disposal/Safety: | See MSDS for this product |
KEEP OUT OF REACH OF CHILDREN.
REFER TO MATERIAL SAFETY DATA SHEET - EMERGENCY
MEDICAL & SPILL CONTROL CHEMTREC (800) 424-9300
Made in the USA for Autobody Brands
International, a division of IAMG
Scottsdale, AZ 85257 -
www.autobodybrands.com
Call 1-87REFINISH (1-877-334-6474) to
find your local Advantage Refinish Products
supplier. Or visit our website:
www.autobodybrands.com